The overtemperature of the mining machines leads to unstable hashrate, how to solve it?

If the indoor temperature is too high, you can increase the ventilation volume to improve heat dissipation, specifically, increase the number of fans, or increase the area of air inlet and outlet. If the outdoor temperature is too high, add a water curtain to reduce the air inlet temperature.

Many miners set aside a plot of land at home to build a non-specialist mining farm for small-scale mining, which is possible with few mining machines. However, if there are more than ten mining machines, it will cause too much heat from the machines to dissipate, leading to the high-temperature environment of the mining machines for extended time.

Under such a high temperature environment, the high temperature protection mechanism of the mining machines is triggered, and it is easy to cause no hashrate or no data in the backstage. If the machines have high temperature protection in place, indicating that the temperature of the machines has exceeded the upper limit, the machines will stop working, and the machines need to be rebooted to work normally. If batch or frequent high temperature protections occur, the mining environment needs to be improved.

If the indoor temperature is too high, you can increase the ventilation volume to improve heat dissipation, specifically, increase the number of fans, or increase the area of air inlet and outlet. If the outdoor temperature is too high, add a water curtain to reduce the air inlet temperature. In addition, check whether the radiators of the mining machines are blocked by dust, catkins, etc., and clean up dust regularly.

When cleaning dust, be sure to cut off electricity first. Remove only the fan if dust blocks the operation board. Do not remove the baffle. If the fragile sticker of the baffle screw is damaged, the warranty will be invalid. When installing the fans, pay attention not to inversely install the front and rear fans, and the air outlet direction of the fans must be backward. For attention on dust cleaning, please view: How to deal with serious deposition of dust falling from mining machines?